Details I Beitian BN-880 GPS GLONASS Module I Professional GPS for APM, Pixhawk, Omnibus, BetaFlight, iNav
The Beitian BN-880 is one of the smallest GLONASS-compatible GPS modules in the RC field and suitable for all common flight controls.
Features at its Best
- Beitian BN-880 is suitable for the Open source flight controller, not for flight control with SCM.
- It is a dual-module compass, with an electronic compass IC HMC5883L.
- This GPS module has flash to save the configuration. So you do not need to reset next time when you use it.
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- When you use it for Raspberry Pi, there is no driver needed but you need to install the software.
Package included
- 1x BN880 GPS
- 1x electric wire
Specification
| Power supply: | DC voltage 2.8v ~ 6.0v, typical: 3.3v or 5.0" |
| consumption: | current 50ma @ 5v |
| formats: | GPS, GLONASS, GALILEO, BEIDOU, QZSS and SBAS |
| channels: | 72 |
| reception sensitivity: | trace-167dbm |
| arrests: | 148dbm |
| positioning of the time: | cold start: avg26s warm |
| start: | approx. 25s |
| hot start:: | approx. 3s |
| positioning precision level : | 2m at open wind |
| production frequency: | 1hz-10hz, delay 1 Hz |
| speed precison: | 0.1 m / s (without help) |
| acceleration precison: | 0.1 m / s (without help) |
| Dynamic characteristics: | max height: 18000m |
| Max speed: | 5153m / s |
| Max acceleration: | 4g |
| Uart interface: | uart port: txda and rxd |
| Support rate: | 4800bps to 115200bps, warpage 38400dps |
| Working temperature: | -40 - + 85 |
| Storage temperature: | -40 - + 85 |
| Size: | 28mm x 28mm x 10mm |
| Weight: | 10g |
| The module pins: | sda, gnd, tx, rx, vcc , scl |
Media
gimbalcar.de, a service brought to you by FlyingMachines - Janny Wilke is WEEE registered with reg. No. DE87341684.
